I-China GGG50 Hlola I-Valve CV-A-11 Umkhiqizi Nomhlinzeki

GGG50 Hlola Valve CV-A-11

I-GGG50 Hlola I-Valve CV-A-11 Isithombe Esifakiwe

Incazelo emfushane:

Imodeli No. CV-A-11
I-China I-valve yesheke ethule ikhiqiza ama-valve esheke e-ductile iron aqondile ane-flange iyaphela, PN10/PN16/150LBS. Izinga lokushisa: -40℃-+100℃

Cela ukucaphuna

Isici

Ibanga Lemikhiqizo

Ukusebenza kanye ne-OM

Isicelo

Omaka bomkhiqizo

Imininingwane Esheshayo
Idizayini ejwayelekile: DIN3202 F6
Impahla yomzimba: iron ductile
Umphini: insimbi engagqwali 304
Isihlalo somzimba: Insimbi engagqwali eshiselwe ukumbondelana kokuqedwa, kuqediwe okuncane
Isihlalo Sediski: EPDM
Ububanzi bokuzisholo: DN200 8″
Ingcindezi: PN10 PN16
Qeda uxhumano: RF. I-Flange EN1092-1
Ubuso nobuso: EN558-1/8
Izinga lokushisa lokusebenza: -40℃~+100℃.
Ukuhlolwa nokuhlolwa: EN12266-1
I-Epoxy Powder ifakwe ngaphakathi nangaphandle
I-EN 10204 3.1 ngevalvu ngayinye elethiwe

Okwedlule: GGG50 Hlola Valve CV-H-009

Olandelayo: I-GGG50 Foot Check Valve

Impahla Yomzimba Etholakalayo: I-Cast Iron GG25, i-Ductile iron GGG40, GGG50
Indandatho yesihlalo somzimba ozikhethela yona: SS304, SS316, SS316L, Bronze
Ukukhala Kwesihlalo Ongakukhetha: EPDM, NBR, PTFE.
Idizayini Ongayikhetha: I-DIN / BS/ ANSI enomehluko Ubuso nobuso ubude
Ukuphela Ongakukhetha: BS4504/EN1092-1 PN16/ ANSI B16.5 RF
Ibanga losayizi: DN50-DN600 (2″-24″)
Ibanga Lokucindezela: PN10, PN16, PN20(150LBS)
Umbala wendawo ozikhethela yona: RAL5002, RAL5015. I-RAL5005, ebomvu, emnyama. Noma ngokwezifiso

•Ivaluvu Yokuhlola Ethule isetshenziswa njengesivikelo ekugelezeni okubuyela emuva lapho ugesi ungasebenzi ezindaweni lapho ukungcoliswa komsindo noma ukushaya ngesando kwamanzi kuyindaba ebucayi. Ingakwazi ukunikeza ukusebenza okuthulile kuphela kodwa nokulahlekelwa kwekhanda eliphansi.
•Umzimba onamandla we-iron ductile osetshenziselwa ukuqina kanye nesisindo esincane.
•Idizayini eguqukayo ethuthukisiwe yomzimba owodwa one-diffuser inikeza ukugeleza okulula futhi iqinisekisa ukulahlekelwa kwekhanda eliphansi.
•Ivalve yokuhlola ukulahleka kwekhanda ephansi kakhulu, ukonga okukhulu ezindlekweni zamandla okumpompa, idiski ye-valve ene-stroker emfushane kanye ne-spring reverse ngokushesha kuneningi lama-valve okuhlola.
•Igcotshwe ngempushana epoxy ngaphakathi nangaphandle ukuze ingagqwali.
•I-bronze bushing inciphisa inkinga yokugqoka ngesikhathi sokusebenza.
•Idizayini ye-Hydrodynamic enentwasahlobo iqinisekisa ukungashayeki futhi amanzi angenasando.
•Isiphethu sensimbi engagqwali sifihlwe ku-diffuser ngaphansi kokuvikelwa ngenkathi i-valve isebenza.
•Idiski izovala kahle ngaphambi kokuhlehla, futhi ikhulise isivinini sokuvala sifike ku-0.2 Sec.
• Ukufakwa kungaba mpo/ovundlile/kuthambekele.
•Thobela i-EN 558-1, ISO 5752 kanye ne-EN 1092-2, ISO 7005-2 flange dimension.